Added to your cart

Make Your Own PadPillow

The PadPillow is one of our most popular products, and we decided to offer up a Do-It-Yourself Guide for making your very own PadPillow from scratch. Now making PadPillow is just as much fun as using it! This DIY project is great for families or just anyone who loves some hands-on arts and crafts.

Here's what you need to do, one step at a time:

  1. Buy (or reuse) a large piece of sturdy cloth for the PadPillow exterior. It should measure 0.45 yards (about 16 inches) long and 45 inches wide. A tough material like denim works best, but you can experiment with other fabrics. Gather a few necessary tools: scissors, pencil, a sewing needle and thread, a sewing machine, a razor knife, and a ruler. Lastly, you will need a small piece of leather to make a leather tab.

  2. Purchase a large chunk of carving foam, which can be found at art supply stores or other specialty stores. This will form the soft body of the PadPillow.

  3. Download IPEVO's printable .pdf file of PadPillow cutouts, and print the document in its original size. Cut out the shapes from the printed document with scissors. Place the four cutouts onto your chosen cloth. Trace the shapes with a pencil.

  4. Cut the cloth according to the shapes with scissors. You will now have three cloth cutouts — one long rectangle and two chisel-like shapes.

  5. Using the cutout document as your guide, sew the leather tag onto the rectangular cloth cutouts using needle and thread.

  6. With a sewing machine, sew the chisel shapes onto the rectangular shape using the cutout document as a guide for where to join the pieces.

  7. When you've sewn all three cloth cutouts together, you'll have the basic shape of the PadPillow with a hole in the back to stuff foam into.

  8. From your carving foam, cut your first piece of foam using a ruler and razor knife. The smaller piece should measure 12.6 x 9.1 x 1.6 inches (32 x 23 x 4cm).

  9. Shave down one side of the foam piece to form a semi-triangular shape rather than a simple rectangle.

  10. Cut your second triangular piece of foam. This piece measures 6.3 x 5.7 x 12.6 inches (16 x 14 x 32cm ), where 6.3 inches is the base of the triangle, 5.7 inches is the height, and 12.6 inches is the length.

  11. Carefully stuff the foam pieces one at a time into the opening of the sewn-together cloth cutouts.

  12. Try folding the two foam sections together. If it doesn't fold quite right, you'll need to remove the foam pieces and trim them for a better fit.

  13. Enjoy your very own homemade PadPillow! It's perfect to hold iPad and ebook readers in the lap or anywhere else.

Buy Now

TOP